-4.4%

SUHR JACK RABBIT PEDALE TREMOLO PER CHITARRA

Stato: nuovo

SUHR JACK RABBIT PEDALE TREMOLO PER CHITARRA
Disponibile in negozio
SKU
9992
Prezzo speciale 239,00 € Prezzo 250,00 €

Oppure in rate mensili

Durata Importo rata TAN TAEG Interessi Importo totale Dovuto
6 41.45 € 13.78 44.96 9.7 € 264.70 €
12 21.4 € 13.47 30.08 17.8 € 272.80 €

Spedizioni Veloci
con corriere espresso

Consulenza Telefonica
Gratuita

Migliore Tariffa
Garantita

Acquisti Sicuri
Crittografati con SSL


jack rabbit


 

overview:
jack rabbit is a high quality analog pedal, that delivers a wide variety of tremolo effects - from warm wobble to whacked out. it features simple control over tempo by incorporating both tap, and strum tempo modes. it's modulation rate spans from 1hz to 20hz and utilizes a tempo subdivision switch. the jack rabbit tremolo is housed in a sturdy, aluminum enclosure for maximum protection from abuse. it can be remote controlled via the fxlink jack.

like all suhr pedals, the jack rabbit tremolo is true bypass and can be powered from 9-18vdc, drawing low current for extended battery life. it is protected from both over voltage and reverse voltage.


jack rabbit
tempo subdivision switch:
jack rabbit features quarter note, eighth note, and quarter note triplet subdivisions.


tone shaping tools:
jack rabbit features an easy to tweak layout which includes rate, level, waveform, and depth controls.
rate: controls the speed of the tremolo effect, from 1hz to 20hz.
level: controls the output level of the pedal, from +0db to +14db.
depth: controls the depth of the tremolo effect.
waveform: selects the modulation waveform which includes sine, square, triangle, reverse ramp, and ramp.


jack rabbit

battery monitor:
the internal 9v battery is monitored at both power up and during use. the user will be alerted when the battery voltage becomes low. when the battery becomes too low to reliably operate the pedal, true bypass is activated.


sample settings


sine wave:
vintage-style tremolo inspired by the best tube tremolo circuits of the 1960's jack rabbit

square wave:
an on/off tremolo that ranges from slow choppy stutter to helicopter whirl jack rabbit

ramp up:
psychadellic swells give your playing a reverse feel jack rabbit


specifications:
input impedance: 1m ohm
output impedance: 600 ohm
power connector: 9vdc, center negative, 2.1mm x 5.5mm
operating voltage: 5v to 18v (nominal 9v)
maximum voltage: 20vdc
reverse battery protection: yes
over voltage protection: yes
current consumption: < 20ma
estimated battery life: 25 – 50 hours continuous use
dimensions: 2.50" width x 4.50" depth x 1.25" height
weight: 0.75 pound
fxlink connector: 1/8" stereo
fxlink max voltage: 3.3vdc
shield -> tip: activate on/off
shield -> ring: external tap
rohs compliant: yes
agency approvals: n/a